Materiale per SEM e TEM
Consumabili ed accessori per microscopia elettronica.
Ecco tutte le sezioni scaricabili del catalogo TAAB:
- Grids and Support Films
- EM Filaments & Apertures
- EM Calibration
- Filtration
- Specimen Preparation
- Tweezer
- Vacuum Coaters
- Evaporation Supplies, Oils & Greases
- Material Science
- SEM, TEM, STM Supplies
- Optical Microscopy
- Microtomy and Histology
- Water Chillers
- Ultrasonic and Cleaning Supplies
- Magnifiers and Stereoscopes
- Storage and Disposable Ware
- Photographic Supplies
- Safety and Protection
- Chemicals
- Chemical Listing
- Index
Scanning XPS Microprobe – QUANTERA II
Quantera II provides two in situ sample parking stations which enables the automated analysis of all three sample platens in a single user defined analysis queue
Scanning Auger Nanoprobe – PHI 710
The PHI 710 Scanning Auger Nanoprobe is a unique, high performance Auger Electron Spectroscopy (AES) instrument that provides elemental and chemical state information from sample surfaces and nano-scale features, thin films, and interfaces
Time-of-Flight SIMS – PHI nanoTOF II
PHI’s patented TRIFT mass spectrometer provides superior sensitivity, low spectral background, and the unique ability to image highly topographic surfaces
Variable Temperature Micro Probe Systems
The Variable Temperature Micro Probe Systems, VTMP, (or Low Temperature Micro Probe Systems, LTMP) allow the user to probe devices mounted on the cold stage of a micro refrigerator
Hall Measurement System
The Variable Temperature Hall System (VTHS) allows the user to make automatic measurements of resistivity, mobility and carrier concentration of a wide range of samples using the Van der Pauw method over a temperature range from 70K to 730K
Seebeck Measurement Systems
The Seebeck Measurement System allows users to make automatic measurements of the temperature-dependent Seebeck potential of metals, semiconductors and other electrically conductive samples over a temperature range from 70 K to 730 K, and from 300K to 730K
Micro Miniature Refrigerators
Micro Miniature Refrigerators are small, cryogenic refrigerators that derive their cooling power from the Joule-Thomson expansion of a high-pressure gas.
SC7620 Mini Sputter Coater/Glow Discharge System
The SC7620 is a compact entry-level SEM sputter coater
Q150R Rotary-Pumped Sputter Coater/Carbon Coater
The Q150R is a compact rotary-pumped coating system suitable for SEM sputtering with non-oxidising (noble) metals
Q300R T Triple Target, Large Chamber, Rotary-Pumped Sputter Coater
The Q300R T is a large chamber, rotary-pumped coating system ideally suited for sputtering a single large diameter specimen up to 8"/200 mm (e.g. a wafer), or multiple smaller specimens over a similar diameter
Q300T T Triple Target, Large Chamber, Turbo-Pumped Sputter Coater
The Q300T T is a large chamber, turbo-pumped coating system ideally suited for sputtering a single large diameter specimen up to 8"/200mm (eg a wafer), or multiple smaller specimens over a similar diameter. The Q300T T is suitable for sputtering both noble and oxidising metals for SEM specimen preparation and for thin film applications
E3100 Critical Point Dryer
The E3100 large chamber critical point dryer has been anindustry standard for over 35 years and is used in numerous scanning electron microscopy (SEM) laboratories around the world. Primarily used for the processing of lifesciences and geological specimens, the E3100 can also used for the controlled drying MEMs and aerogels. The E3100 is supplied with the E3100-01 tissue boat and has three slots each with three tissue baskets, giving a total of nine.
